This machine is the light of advanced products, combined with domestic practice to improve efficiency and ensure the operational safety of the custom designed set of equipment.
Most suitable for the production of large electric control box and transmission and distribution construction works on site use.
High flexibility, small size and strong function, high productivity and efficiency.
Low-noise sound, beautiful finished products will work without environmental pollution.
In addition to Four in One (bent row, punching, shearing) increase in other external valve control 3m tubing can be equipped with the crimp, cut cable, or embossing, etc., to achieve a multifunctional.
Three in one machine DHY-150A bus
Features: cutting (CWC-150 or CWC-150V), punching (CH-60), level bend (CB-150D or CB-200A) form
Flow table size: 850mm (length) × 650mm (width) × 1200mm (H)
Input voltage: single 50HZ, 220V
Rated Working Pressure: 700kgf/cm2 (high pressure safety valve settings) 10000 (Psi)
Cut row machine output: 20ton
Cut row range (mm): copper and aluminum row ≤ 150 × 10
Curved row of machine output: 20ton
Ping bend range (mm): copper and aluminum row ≤ 150 × 10
Ping bend angle: 0 degrees -90 degrees
Punching Machine output: 31ton
Row of holes to edge distance: 95mm/110m
Standard package punching mold: punching Φ7mm, Φ9mm, Φ10.5mm, Φ13.8mm, Φ17mm, Φ20.5mm
Weight: 170kg |
