Name: Hydraulic crimping tool
Crimping range :16-300mm2
Pressure: 10T
Weight: 5kg
Mold configuration: 16.25.35.50.70.95.120.150.185.240.300
Uses: suitable for transmission and distribution overhead and underground copper and aluminum cable terminals, crimp sleeve, with hexagonal crimping dies close, good conductivity, easy to fall off. Used as a pressure pipe tool, just install the module can be pressure-pressure pipe.
Automatic reset, only instead of safety relief device also eliminates the hand of time; manual pressure relief button halfway to release the crimp can be set quickly reset mw modular valve, easy maintenance, less failure; head turn used open and bolt, light the world firmly rotate freely 360 degrees.
|
